Handle will not recline or is difficult to tilt back from the upright position.

Safety: Unplug the unit before working near moving parts.

• 1. Clear debris: Inspect the recline pedal and pivot area for carpet fibers or foreign objects. Remove any obstructions.
• 2. Check pedal action: Press the pedal and observe the latch mechanism. If the pedal moves but the latch does not, the linkage may be broken and the recline pedal assembly should be replaced.
• 3. Lubricate pivot (lightly): Apply a small amount of plastic-safe lubricant to the handle pivot if it is stiff, avoiding overspray on belts or electrical parts.
• 4. Replace damaged parts: If the pivot pin is bent or the housing is cracked, replace the handle assembly or base as needed.