Electrolux Weak Brush Drive or High Friction

Brushes spin intermittently or slow down significantly under light load.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Worn brush bearings, Stretched belt, Debris in brush end caps, Failing brush motor

Safety first: Unplug before working on the brush area.

Remove and clean brush: Take out the brush roll and clean the end caps thoroughly.
Check bearings: Spin the brush shaft by hand; if rough or stiff, replace the brush roll.
Replace belt: Install a new Electrolux brush belt if the old one is glazed or stretched.
Motor test: If friction is low but speed is still weak, the brush motor may be failing and should be replaced.

Medium 3/5

Brush Roll Assembly

Check Price on Amazon

We may earn a commission from links on this page.