Gorenje
No Solution Spray
No water or detergent sprays onto the carpet when the trigger is pressed, but the machine otherwise runs normally.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Empty or improperly seated clean water tank, Blocked spray nozzle, Airlock in solution line, Failed trigger microswitch
How to Fix / Troubleshooting
Safety first: Unplug the unit before removing nozzles or covers.
- Check tank and detergent: Ensure the clean water tank is filled and correctly seated. If there is a separate detergent tank, confirm it has solution and is properly installed.
- Prime the pump: Fill the tank with warm water, reinstall, and hold the trigger for 30–60 seconds with the nozzle pointed into a sink to purge air.
- Clean the spray nozzle: Remove the nozzle and soak it in warm water. Use a soft brush to clear mineral deposits.
- Inspect trigger switch: Access the handle and test the trigger microswitch with a multimeter. Replace if it does not close when the trigger is pulled.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Spray Nozzle Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements