Gorenje
Solution Valve Not Closing Properly
Solution continues to drip from the nozzle after releasing the trigger.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Worn or contaminated solenoid valve, Debris in valve seat, Sticking mechanical valve, Excessive line pressure
How to Fix / Troubleshooting
Safety first: Unplug the unit and relieve pressure by pulling the trigger with the machine off.
- Flush with clean water: Fill the tank with warm clean water and run the pump briefly to flush any debris.
- Inspect nozzle and valve: Remove the nozzle and check for drips at the valve outlet. Clean the area with warm water.
- Access solenoid valve: Open the housing and locate the solution solenoid valve. Remove and inspect for debris in the inlet and outlet ports. Rinse and reinstall.
- Replace valve if worn: If dripping persists, replace the solenoid or mechanical valve assembly.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Solution Solenoid Valve
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements