Gorenje
Thermal Overload Trip
Unit shuts off unexpectedly during use and will not restart until it cools down.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Blocked air vents, Dirty filters, Overloaded motor due to clogs, Failing thermal protector
How to Fix / Troubleshooting
Safety first: Unplug and allow the unit to cool fully before further use.
- Clean all filters: Wash or replace motor and exhaust filters as specified in the manual.
- Clear blockages: Check hose, nozzle, and tank inlets for clogs that can strain the motor.
- Inspect vents: Ensure all cooling vents are free of dust and lint.
- Monitor usage: Avoid running the unit continuously for very long periods; allow short breaks to cool.
- Replace thermal protector or motor: If trips occur frequently even with clean airflow, the thermal protector or motor may be failing and should be replaced.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Motor Thermal Protector
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements