Hoover User Interface LED/Display Failure

Hoover carpet cleaner indicator lights or display do not work, but the unit still runs

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Failed LEDs or display module, Loose UI ribbon cable, Faulty UI PCB, Broken UI housing

Safety first: Unplug the unit before opening the control panel.

Check connections: Remove the control panel cover and inspect the UI ribbon cable and connectors. Reseat firmly.
Inspect for damage: Look for cracked solder joints or burnt components on the UI PCB.
Test operation: If the cleaner runs normally but lights remain off, the UI board or LEDs may need replacement.
Replace UI module: Install a new Hoover control panel / UI assembly if available for your model.

Medium 3/5

User Interface PCB

Check Price on Amazon

We may earn a commission from links on this page.