Unit leaves streaks or dirty lines on the carpet after cleaning.

Safety first: Unplug the unit before cleaning the floorhead.

• Clean spray jets: Remove and soak the spray bar or nozzles in warm water. Clear each jet with a soft brush.
• Inspect brush roll: Check for flattened or missing bristles. Replace the brush roll if worn unevenly.
• Clean suction edge: Remove lint and debris from the suction lip at the front of the nozzle to ensure even pickup.
• Check floorhead alignment: Ensure the floorhead is not bent and sits flat on the carpet. Tighten any loose mounting screws.