Prochem
Low Vacuum Performance
Vacuum suction is very weak at the wand; carpets remain wet after multiple passes.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Clogged vacuum hose or wand, Full or improperly seated waste tank, Blocked waste tank lid gasket or filter, Worn or failed vacuum motor
How to Fix / Troubleshooting
Safety: Unplug the machine before inspecting internal components.
- Check hose and wand: Disconnect the vacuum hose and inspect for clogs by looking through or pushing a flexible rod. Clear any obstructions. Check the wand head for lint buildup.
- Inspect waste tank: Empty the waste tank completely. Ensure the tank is seated correctly and that the lid gasket is intact and sealing all around. Replace the gasket if torn or flattened.
- Clean waste tank filter: Remove and wash the waste tank filter or deflector screen. Allow to dry before reinstalling.
- Test vacuum motor: Listen for unusual noises or slow startup. If suction remains weak with a clear hose and clean tank, test vacuum motor airflow directly at the machine inlet. Replace the Prochem vacuum motor if performance is poor.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Prochem Vacuum Motor
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements