Russell Hobbs Electrical Overheating / Motor or Belt Burn

Strong burning smell or smoke from the base during operation.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Seized brush bar causing belt to burn, Failing main motor windings, Debris in motor fan, Shorted wiring

How to Fix / Troubleshooting

Safety first: Immediately switch off, unplug the unit, and remove it from the carpet. Do not continue to use until inspected.

  • Inspect brush and belt: Turn the unit over and check for melted belt material or jammed brush bar. Replace the brush drive belt if burnt.
  • Check for debris: Open the motor housing (if accessible) and remove any lint or fibers from the motor fan area.
  • Smell motor: A strong electrical burning smell from the motor itself usually means the motor is failing and must be replaced.
  • Wiring check: Look for scorched or melted wires and repair/replace as needed.
Advertisements

Repair Difficulty

Hard 4/5

Required Part

Brush Drive Belt
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements