Russell Hobbs Main Motor Circuit Failure

Unit powers on but main motor does not run; only indicator lights are on.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Open-circuit main motor, Loose motor connectors, Failed motor triac/relay on PCB, Burnt motor brushes (if brushed motor)

Safety first: Unplug before opening the unit.

Check for blockages: Ensure the motor is not mechanically jammed by debris in the fan or suction path.
Inspect motor wiring: Access the main motor and verify that all connectors are firmly attached and not burnt.
Smell test: A burnt smell from the motor area often indicates winding or brush failure; the motor will need replacement.
PCB inspection: Look for burnt components around the motor driver (triac or relay) on the control PCB. If damaged, the PCB should be replaced.

Professional Required 5/5

Main Suction Motor

Check Price on Amazon

We may earn a commission from links on this page.