AEG Jammed Brew Unit Mechanism

Brew unit is stuck and cannot be removed; machine may show mechanical noises on startup.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Brew unit stopped mid-cycle due to power loss, Excess coffee residues blocking movement, Broken drive gear teeth, Mis-synchronized brew drive

Safety: Unplug before attempting to free the brew unit.

Do not force: Do not pull the brew unit with excessive force; this can break plastic parts.
Manual reset: Some AEG models allow manual rotation of the brew drive via a service access hole. Use a suitable tool to gently rotate the drive to the home position.
Clean visible coffee: Remove loose coffee grounds around the brew unit with a vacuum or brush.
Power cycle: After manual reset, reinstall the brew unit, close the door, and power on to let the machine re-home the mechanism.

Hard 4/5

Brew Unit Drive Gearbox

Check Price on Amazon

We may earn a commission from links on this page.