Black+Decker Single-Serve Pump / Needle Blockage

Single-serve side (on dual Black+Decker models) does not dispense coffee or water.

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Clogged pod needle with coffee grounds, blocked single-serve water path, failed single-serve pump, scaled internal tubing on single-serve side

How to Fix / Troubleshooting

Safety first: Unplug and allow the unit to cool before servicing the single-serve side.

Clean pod holder and needle:

Remove the single-serve pod holder and rinse thoroughly.
Use a small cleaning tool or paper clip to gently clear the piercing needle holes of coffee residue.

Descale single-serve path:

Run a descaling cycle focusing on the single-serve side, following the manual for your dual model.

Pump check:

During a brew attempt, listen for the pump. If it hums but no water flows, blockage is likely; if silent, the pump or its power supply may have failed.

When to replace:

Replace a non-functioning single-serve pump or a cracked pod holder that does not seal properly.

Repair Difficulty

Medium 3/5

Required Part

Single-Serve Pump

Check Price on Amazon

We may earn a commission from links on this page.