Bodum Carafe Presence Switch Misalignment

Bodum coffee maker’s carafe does not sit properly on the hot plate; brewing stops when the carafe is slightly moved.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Bent carafe platform, Misaligned carafe sensor lever, Broken microswitch under hot plate, Warped carafe base

Safety first: Unplug and cool the unit before inspection.

Steps to try:

Check carafe base: Inspect the bottom of the carafe for warping or damage. Replace if not flat.
Align carafe: Ensure the carafe is pushed fully back so it depresses any sensor lever under the basket.
Internal check (advanced): Remove the bottom cover and locate the carafe presence microswitch. Verify the actuator lever aligns with the carafe platform and adjust if bent.

If the microswitch has failed electrically, it will need replacement.

Medium 3/5

Carafe Presence Microswitch

Check Price on Amazon

We may earn a commission from links on this page.