Bosch
Start Inhibit / Safety Interlock Not Satisfied
Machine powers on but will not start brewing; pressing start does nothing.
Advertisements
Possible Causes
Brew unit not inserted correctly, Drip tray or grounds container missing, Door switch not engaged, Software lock due to pending descaling
How to Fix / Troubleshooting
Safety first: Unplug the machine before reaching into the brew chamber.
- Check all removable parts: Ensure the brew unit, drip tray, and grounds container are fully inserted and seated. Remove and reinsert each until it clicks.
- Verify door closure: Close the service door firmly. If the door switch is not engaged, the machine will not start.
- Look for on-screen prompts: Some Bosch models require descaling or cleaning before brewing. Follow any displayed instructions.
- Power cycle: Turn the machine off, unplug for 2 minutes, then plug back in and try again.
- If still no response: The door switch, tray sensor, or control board may be faulty. Professional diagnosis is recommended.
Advertisements
Repair Difficulty
Easy
2/5
Advertisements