Bunn Brew Overflow / Excessive Flow

Bunn coffee maker overflows the brew funnel or carafe during brewing.

Advertisements

Possible Causes

Incorrect grind (too fine) causing backup, Blocked funnel outlet, Sprayhead missing or incorrect, Flow restrictor missing or damaged

How to Fix / Troubleshooting

Safety: Hot coffee overflow can cause burns. Turn off the brewer immediately if overflow occurs.

Steps:

  • 1. Check coffee grind and filter: Use the grind size recommended by Bunn (typically medium drip). Avoid espresso-fine grinds. Ensure you are using the correct Bunn filter size and that it is properly seated.
  • 2. Inspect brew funnel: Remove the funnel and check the outlet hole for obstructions (coffee grounds, filter paper). Clean thoroughly.
  • 3. Verify sprayhead: Ensure the correct Bunn sprayhead is installed for your model. Using the wrong sprayhead can alter flow and cause overflow.
  • 4. Check restrictor: Confirm that the flow restrictor or orifice is present and not drilled out or removed. Replace if missing or modified.
  • 5. Brew smaller batch: If you are brewing less than a full pot, ensure the water volume matches the coffee dose and filter capacity.
Advertisements

Repair Difficulty

Very Easy 1/5

Required Part

Brew Funnel
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements