Dualit Capsule Detection Failure

Machine does not recognize that a capsule has been inserted; lever closes but no brew starts.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Faulty capsule presence microswitch, Misaligned lever mechanism, Broken actuator tab, Wiring fault to capsule sensor

Safety first: Unplug the machine before working on the capsule mechanism.

Steps:

Check lever action: Ensure the lever closes fully and feels normal. Excessive looseness may indicate a broken actuator.
Inspect microswitch: Open the housing around the capsule chamber and locate the capsule presence switch. Verify that it is actuated when the lever closes.
Test switch: Use a multimeter to check continuity when the switch is pressed. Replace if faulty.

Medium 3/5

Capsule Presence Microswitch

Check Price on Amazon

We may earn a commission from links on this page.