E06 error appears and the coffee maker will not brew; the lid-closed or carafe-present icon flashes.

Safety: Unplug the coffee maker before accessing switches.

• 1. Verify lid and carafe position:
  • Ensure the brew basket lid is fully closed and latched.
  • Confirm the glass carafe is seated correctly on the warming plate.
• 2. Inspect lid switch:
  • Open the top cover to locate the lid microswitch and its plastic actuator.
  • Check for broken plastic tabs or misalignment that prevents the switch from being fully depressed.
  • Manually press the switch; you should hear a distinct click.
  • Test the switch with a multimeter for continuity when pressed. Replace if it does not change state.
• 3. Inspect carafe sensor:
  • Some Frigidaire models use a small switch or optical sensor under the warming plate.
  • Remove the bottom cover and locate the carafe presence switch.
  • Test for continuity when the plate is pressed (simulating carafe weight). Replace the switch if it fails.
• 4. Check wiring:
  • Follow the switch harness back to the control board and ensure connectors are tight and wires are not broken.
• 5. Reassemble and test:
  • Reinstall covers, plug in, and test by closing the lid and placing the carafe. E06 should clear and brewing should start.