Frigidaire
Water Intake Blockage or Pump Failure
Water reservoir level does not decrease during brewing; no water is drawn into the machine.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Clogged reservoir outlet valve, Blocked inlet screen, Airlock in suction line, Failed water pump
How to Fix / Troubleshooting
Safety: Unplug before internal inspection.
- 1. Check reservoir outlet:
- Remove the reservoir and press the outlet valve (if spring-loaded) to ensure water flows freely.
- Clean any debris and rinse thoroughly.
- 2. Clean inlet screen:
- Inspect the machine's inlet port and screen; clean with a soft brush.
- 3. Purge airlock:
- Fill the reservoir completely and reseat firmly.
- Run a brew cycle and gently tap the side of the unit to help dislodge air.
- 4. Test pump:
- Listen for pump operation; if silent, test for voltage at the pump terminals during brew (qualified persons only).
- Replace the pump if it does not run or is electrically open.
Advertisements
Repair Difficulty
Medium
3/5
Advertisements