Insignia Partial Display Failure

Display is on but segments are missing or unreadable, making it hard to set time or programs.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Loose display ribbon cable, Damaged LCD/LED display module, Control board driver failure, Moisture damage to display

Safety first: Unplug before opening the control panel.

Power reset: Unplug for 5 minutes and plug back in to see if the display refreshes.
Inspect display connection (advanced): Remove the front panel (unplugged) and check that the display ribbon cable is fully seated on the control board.
Dry moisture: If the panel was exposed to steam, allow it to dry in a warm, dry place for 24 hours and retest.

If segments remain missing, the display or control board will need replacement.

Hard 4/5

Display Module

Check Price on Amazon

We may earn a commission from links on this page.