Kenmore
Display Backlight or LCD Failure
Display is very dim or unreadable, but the coffee maker still brews.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed backlight LED, Loose display ribbon cable, Aging LCD panel, Low voltage to display circuit
How to Fix / Troubleshooting
Safety first: Unplug before opening the control panel.
- Adjust viewing angle: Some LCDs are angle-sensitive; check if the display is clearer from a different angle.
- Inspect display connection: Remove the control panel cover and reseat the ribbon cable between the display and control board.
- Check for corrosion: Clean any corrosion on the display connector with isopropyl alcohol.
- Replace display or board: If the backlight or LCD is defective, replace the display module or the entire control board assembly, depending on design.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Display Module / Control Board
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements