ERR7
KitchenAid
Real-Time Clock / Memory Error
Display shows ERR7 and the clock or programming functions behave erratically on a KitchenAid programmable coffee maker.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Power surge corrupting control board memory, Failing control PCB, Internal backup capacitor failure, Moisture damage to logic circuit
How to Fix / Troubleshooting
Power reset:
- Unplug the coffee maker for at least 10–15 minutes to fully discharge internal capacitors.
- Plug back in and reset the clock and program settings according to the user manual.
Check power quality:
- Avoid plugging the coffee maker into the same outlet as high-draw appliances (microwave, toaster oven) that can cause voltage dips.
- Use a surge protector to protect the control board from spikes.
If ERR7 returns frequently:
- The main control board may have a failing memory or clock circuit.
- Inspect the board for corrosion or burn marks if you open the unit.
- Replacement of the control PCB is usually required to permanently resolve this error.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Main Control Board
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements