E06
L’OR
User Interface / Keypad Communication Error
E06 appears, machine powers on but buttons do not respond or respond erratically.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Loose ribbon cable between control PCB and touch panel, Moisture ingress behind control panel, Failed touch PCB, Main control board fault
How to Fix / Troubleshooting
Safety: Disconnect from mains before opening any covers.
- Dry the control area: If the machine was recently cleaned or exposed to steam, unplug it and let it dry for several hours. Do not use a hair dryer or heat gun.
- Inspect for visible moisture: If you are experienced and the warranty has expired, remove the top/front cover to inspect the control panel area for condensation or spills. Gently dry with a lint‑free cloth.
- Check ribbon cable: Ensure the flat ribbon cable from the user interface to the main PCB is fully inserted and not damaged.
- If E06 remains: The touch panel or main PCB may need replacement. This is an advanced repair best handled by an authorized technician.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Control Panel PCB
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements