E07

Lavazza Door or Capsule Compartment Safety Switch Error

Machine shows E07 and immediately stops any brewing attempt; may indicate a safety interlock issue.

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Brew head not fully closed, Faulty door microswitch, Misaligned door latch, Broken actuator tab on door

How to Fix / Troubleshooting

Safety first: Unplug the machine before adjusting door components.

Step 1 – Check door closure

Ensure the brew head or capsule door is fully closed and latched.
Remove any capsule that may be preventing full closure.

Step 2 – Inspect latch and actuator

Examine the door latch and any plastic tabs that actuate the internal switch.
If a tab is broken, the door may not trigger the safety switch and the part may need replacement.

Step 3 – Microswitch check (advanced)

Unplug and remove the cover.
Locate the door microswitch and verify that it clicks when the door is closed.
Adjust its position if necessary so it is fully depressed when the door is shut.
Replace the switch if it is mechanically or electrically faulty.

When to seek service

If E07 persists after mechanical adjustments, a wiring or control board issue may be present and should be diagnosed by a technician.

Repair Difficulty

Medium 3/5

Required Part

Door Microswitch

Check Price on Amazon

We may earn a commission from links on this page.