Magimix
Start Circuit / User Interface Fault
Machine powers on but will not start brewing when a coffee button is pressed; no pump noise.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Faulty brew button or touchpad, Broken ribbon cable between keypad and PCB, Control board input failure, Stuck child lock mode
How to Fix / Troubleshooting
Safety first: Unplug the machine before cleaning the control panel.
- Check for lock mode: Ensure no lock symbol is displayed. If it is, follow the manual to disable child lock.
- Clean the buttons: Wipe the control panel with a soft, slightly damp cloth to remove coffee residue that may interfere with touch sensors.
- Try different buttons: If some buttons respond (e.g., hot water) but coffee buttons do not, the specific switch may be faulty.
- Power reset: Unplug for 5–10 minutes, then plug back in and test again.
If the machine still does not respond to brew commands, the keypad or control board likely needs replacement by a technician.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Control Panel / Keypad
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements