E8
Morphy Richards
Milk Frother Temperature / Flow Error
Display shows E8 and the milk frother or integrated milk carafe does not operate.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Milk frother blocked, Milk temperature sensor fault, Milk pump failure, Blocked milk suction tube
How to Fix / Troubleshooting
Safety first: Unplug the machine before disassembling the milk system. Hot milk can cause burns.
- Clean milk system: Disassemble the milk frother, nozzle, and suction tube according to the manual. Soak parts in warm soapy water, then rinse thoroughly. Remove any dried milk deposits.
- Run cleaning program: Use the automatic milk cleaning cycle if your Morphy Richards model has one, using a recommended milk system cleaner.
- Check milk tube: Inspect the silicone milk tube for kinks, cracks, or blockages. Replace if hardened or damaged.
- Check temperature sensor (advanced): On models with a milk temperature probe, ensure it is clean and firmly connected to the control PCB.
If E8 persists after thorough cleaning, the milk pump or temperature sensor may be defective and should be replaced by a technician.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Milk Frother / Milk Pump Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements