E9
Morphy Richards Low Voltage / Power Supply Error

Display shows E9 and the machine will not power up fully or resets repeatedly.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Internal power supply board failure, Loose mains connection, Faulty main control PCB, Shorted component drawing excess current

How to Fix / Troubleshooting

Safety first: Unplug the coffee maker before inspecting the power cord or internal components.

  • Check mains outlet: Test the wall socket with another appliance to ensure it supplies stable power.
  • Inspect power cord: Examine the Morphy Richards power cord and plug for cuts, burns, or loose pins. Replace the cord set if damaged.
  • Remove external loads: Disconnect any extension leads or multi-way adapters and plug the coffee maker directly into a wall socket.
  • Internal inspection (advanced): Remove the base or rear cover to access the power supply section. Look for burnt components, bulging capacitors, or loose connectors on the power supply board and main PCB.

Because power supply faults can be hazardous, if E9 remains or any damage is visible, stop using the appliance and have the power supply or control PCB replaced by a qualified technician.

Advertisements

Repair Difficulty

Professional Required 5/5

Required Part

Power Supply / Main Control PCB
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements