Machine will not power on at all; no lights or display, even when plugged into a known-good outlet.
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Possible Causes
How to Fix / Troubleshooting
Safety first: Verify the outlet with another appliance. Do not open the machine housing unless you are qualified to work on mains-voltage circuits.
User-level checks:
- Check power cord: Inspect the cord for cuts, kinks, or burn marks. Ensure it is fully inserted into both the machine and the wall outlet.
- Try another outlet: Plug the machine directly into a different wall outlet without using an extension cord.
- Check power switch: Ensure the rear or side main power switch (if present) is in the ON position.
When to call a technician: If the machine remains completely dead, an internal fuse, power supply, or control board is likely faulty and must be serviced by a professional. Do not attempt to bypass fuses.
Repair Difficulty
Required Part
We may earn a commission from links on this page.