CHECK GRINDER
Sage Grinder Jam / Overload Condition

Machine displays 'CHECK GRINDER' and grinding stops or is inconsistent

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Foreign object in grinder, Excessively oily beans causing clumping, Worn or misaligned burrs, Blocked grind chute

How to Fix / Troubleshooting

Safety: Unplug the machine before working on the grinder. Do not insert fingers into the burrs.

  • Empty hopper: Remove all beans from the hopper.
  • Clear grind chute:
    • Remove the portafilter cradle and use a small brush to clean the grind chute.
    • Vacuum out any compacted grounds.
  • Inspect burrs:
    • Remove the upper burr carrier according to the manual.
    • Check for stones or hard objects and remove them.
    • Clean both burrs thoroughly.
  • Adjust grind: Set the grind slightly coarser and test with a small amount of beans.
  • Repair: Replace the conical burr set if they are chipped, excessively worn, or misaligned.
Advertisements

Repair Difficulty

Medium 3/5

Required Part

Conical Burr Set
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements