E02
Senseo
Water Intake / Suction Error
E02 displayed; pump runs loudly but no water reaches the brew head.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Air lock in pump, blocked inlet filter at tank connection, cracked suction hose, defective pump check valve
How to Fix / Troubleshooting
Safety first: Unplug the machine before removing the water tank.
- Refill and reseat tank: Fill the tank fully and push it firmly into place.
- Prime pump: With the machine on, run several brew cycles without a pod holder to draw water through the system.
- Clean tank outlet: Rinse and press the valve at the bottom of the tank to ensure free movement.
- Inspect hoses (advanced): Check for cracks or loose clamps on the suction hose from tank to pump.
- Replace pump if needed: If the pump vibrates but cannot draw water even after priming, it may need replacement.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Vibratory Pump Assembly, Suction Hose
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements