E07
Senseo
Steam / Pressure Control Error
E07 displayed; machine reports a steam or pressure fault and may vent steam unexpectedly.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Blocked pressure relief channel, clogged brew head outlet, faulty pressure relief valve, control PCB misreading pressure
How to Fix / Troubleshooting
Safety first: Unplug the machine and allow it to cool completely. Beware of residual steam pressure.
- Clean brew head: Remove the pod holder and thoroughly clean the metal filter plate and outlet holes.
- Descale: Run a full descaling cycle to clear internal pressure channels.
- Inspect pressure relief (advanced): Check the small pressure relief valve or channel near the brew head for blockages.
- Do not block vents: Ensure no tape or objects cover any vent holes.
- Service if unresolved: A faulty pressure relief valve or control PCB should be replaced by a technician.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Pressure Relief Valve, Brew Head Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements