Senseo Keypad / User Interface Failure

Machine does not respond to any button presses, but power LED is lit.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Failed keypad membrane, disconnected UI ribbon cable, liquid damage to UI PCB, stuck buttons

Safety first: Unplug the coffee maker before opening the control panel.

Clean panel surface: Wipe with a slightly damp cloth and dry thoroughly.
Try long press: Hold the power button for 5–10 seconds to see if the machine resets.
Inspect ribbon cable (advanced): Open the housing and reseat the cable between the UI and main board.
Replace UI assembly: If buttons remain unresponsive, the keypad or UI PCB likely needs replacement.

Medium 3/5

User Interface PCB, Keypad Membrane

Check Price on Amazon

We may earn a commission from links on this page.