Display shows E06 and the grinder does not run when a coffee is requested.

Safety first: Turn OFF and unplug the machine before accessing the bean hopper or grinder area.

• Empty bean hopper: Remove all beans from the hopper. Check for stones or foreign objects mixed with the beans.
• Adjust grind setting: Set the grinder to a slightly coarser setting to reduce load on the motor. Avoid adjusting while the grinder is stopped with beans jammed; instead, run the grinder briefly while adjusting if possible.
• Clean grinder chute: Use the supplied cleaning brush or a small, dry brush to clean the grinder chute and burr area. Do not use water inside the grinder.
• Manual burr rotation (if accessible): With the hopper removed, gently try to rotate the upper burr carrier by hand to free any jam. Do not force it.
• Test again: Refill with fresh, dry beans and test. If the grinder still does not run and E06 reappears, the motor or its sensor may be defective.
• Professional repair: Grinder motor replacement or sensor diagnosis requires disassembly of the upper housing and is best done by a technician.