Sunbeam Display / LCD Failure

Display is dim, flickering, or segments are missing, but the coffee maker still brews.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Aging LCD panel, Loose display ribbon cable, Failing backlight driver, Moisture damage to control panel

Safety first: Unplug the coffee maker before opening the control panel.

1. Power reset
- Unplug for 5 minutes, then plug back in to see if the display stabilizes.
2. Dry the panel
- If exposed to steam or spills, let the unit dry for 24 hours unplugged.
3. Inspect display connections (advanced)
- Remove the control panel cover.
- Reseat the ribbon cable between the display and main PCB.
4. Replace control panel
- If segments are permanently missing or the backlight is out, replace the control panel or main PCB assembly as a unit.

Medium 3/5

Control Panel / Display Assembly

Check Price on Amazon

We may earn a commission from links on this page.