FILTER or REPLACE FILTER icon appears on the display, but the coffee maker still brews.

Safety first: Unplug the coffee maker before removing the water reservoir if it is integrated with the filter holder.

• 1. Replace the water filter
  • Remove the reservoir and locate the charcoal filter holder (usually clips into the bottom or side).
  • Open the holder and discard the old filter cartridge.
  • Soak the new Sunbeam-compatible charcoal filter in water for 5–10 minutes, then rinse.
  • Install the new filter into the holder and reattach to the reservoir.
• 2. Reset the filter indicator
  • Press and hold the FILTER or RESET button for 3–5 seconds until the icon clears.
• 3. Optional: run a rinse cycle
  • Fill the reservoir with fresh water and run a brew cycle without coffee to flush the new filter.