Swan Internal Bypass or Hose Misrouting

Swan coffee maker dispenses water into the drip tray or internally instead of through the brew head.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Dislodged hose from brew head, Cracked brew head manifold, Blocked brew head causing water to divert, Incorrect hose reconnection after service

Safety first: Unplug the unit and do not operate it until the water path is correctly restored.

Inspection:

Remove the top cover to access the brew head manifold and hoses.
Check that the hose from the boiler/pump is securely attached to the brew head and not split.
Inspect the brew head for cracks or damage; replace if necessary.
Ensure any bypass or return hoses are correctly routed per the service diagram.

After reassembly, run a water-only cycle to confirm water exits only from the intended outlet.

Hard 4/5

Brew Head Manifold / Silicone Hoses

Check Price on Amazon

We may earn a commission from links on this page.