Swan drip coffee maker will not power on at all; no lights or display.
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Possible Causes
How to Fix / Troubleshooting
Safety first: Ensure the coffee maker is unplugged before any inspection. Do not open the unit while it is connected to mains power.
Basic checks:
- Outlet test: Plug another appliance into the same socket to confirm the outlet works.
- Cord inspection: Check the Swan coffee maker's mains cord for cuts, kinks, or burn marks. If damaged, the cord must be replaced.
- Power switch: Toggle the power switch several times. On some models, a stuck rocker switch can prevent power-up.
Internal checks (advanced):
- Remove the base or rear cover to access the control PCB and internal fuse.
- Test the fuse with a multimeter. If blown, replace it only with the same rating and investigate for underlying shorts.
- If the fuse is intact but there is still no power, the low-voltage power supply on the PCB may have failed and the board will need replacement.
If you are not experienced with electrical repairs, contact a qualified technician to avoid shock or fire hazards.
Repair Difficulty
Required Part
We may earn a commission from links on this page.