Tefal Overheating Component / Electrical Insulation Smell

Burning smell during operation, even though the machine still works.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Dust or coffee oil on heater, Failing pump or motor, Loose electrical connection heating up, New appliance burn-in (temporary)

How to Fix / Troubleshooting

Safety first: If the smell is strong or accompanied by smoke, unplug immediately and do not use the machine.

Steps:

  • Initial use: A slight smell during the first few uses can be normal. If it persists, investigate further.
  • Clean exterior surfaces: Wipe away any coffee spills or oils near the hot plate or boiler area.
  • Internal inspection (advanced): Open the housing and look for discolored wires, melted insulation, or burnt spots on the PCB or heater connections.
  • Stop use if damage found: Replace any burnt components or have the unit serviced professionally.
Advertisements

Repair Difficulty

Hard 4/5

Required Part

Heater Wiring Harness
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements