Zwilling Display Backlight / LCD Failure

Display is very dim, flickers, or some segments are missing.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Aging or failed display module, Loose display connector, Low voltage from power supply

Safety: Unplug the machine before opening the control panel.

Check brightness settings: Some Zwilling models allow brightness adjustment in the menu; increase if set low.
Inspect connectors: Remove the front panel and reseat the display ribbon cable or connector.
Measure supply voltage (advanced): Verify that the display receives the correct voltage from the power supply. Low voltage may indicate a failing power board.
Replace display: If the backlight or segments remain faulty, replace the display module or UI board as a unit.

Medium 3/5

Display Module / UI Board

Check Price on Amazon

We may earn a commission from links on this page.