Beko Indicator / Display Circuit Fault

Cordless vacuum’s LED lights or display do not work, but the vacuum still runs normally.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Failed LED strip or display module, Loose connector between display and main PCB, Damaged display ribbon cable, Partial failure on handle PCB

How to Fix / Troubleshooting

Safety first: Remove the battery before opening the handle or display area.

  • 1. Check brightness settings: Some models allow dimming of display or LEDs. Ensure they are not set to minimum or off.
  • 2. Inspect connections: Open the handle or display housing and check that the LED/display connector is firmly seated on the PCB.
  • 3. Look for damage: Examine the LED strip or display for cracks, burn marks, or corrosion.
  • 4. Replace module: If the vacuum operates normally but indicators remain dead, replace the LED strip or display/handle PCB as a unit.
Advertisements

Repair Difficulty

Medium 3/5

Required Part

LED Display Module
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements