Display shows HOT or a temperature icon; vacuum stops and will not restart immediately

Safety first: Turn the vacuum OFF, remove the battery, and allow the unit to cool for at least 30 minutes.

• Clean filters thoroughly: Remove pre-motor and post-motor filters. Tap off dust and rinse washable filters with cool water. Allow to dry completely before reinstalling.
• Clear airflow path: Detach wand and nozzle. Remove any blockages from the wand, nozzle neck, and cyclone inlets.
• Inspect vents: Use a soft brush to remove dust from motor vents and around the main body.
• Adjust usage: Avoid running continuously on MAX/Turbo, especially on thick carpets. Alternate between modes to reduce heat buildup.
• Persistent overheating: If HOT appears quickly even with clean filters and clear airflow, the motor may be failing and should be replaced.