F1
Black+Decker
Trigger Switch Fault
Vacuum with digital display shows 'F1' and will not start
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Worn or stuck trigger microswitch, Broken trigger lever, Loose wiring to trigger on main PCB
How to Fix / Troubleshooting
Safety first: Remove the battery before inspecting the trigger area.
- Check trigger movement: Squeeze and release the trigger several times. It should move smoothly and spring back.
- Inspect for debris: Look around the trigger for dust or foreign objects that may prevent full travel. Clean with a soft brush.
- Listen for click: With the battery removed, slowly pull the trigger and listen for a faint click from the microswitch. No click suggests a failed switch.
- Professional replacement: Replacing the trigger switch usually requires opening the main housing and desoldering the old switch. Have this done by a qualified technician.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Trigger Microswitch
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements