Bosch
Accessory Brush Overload
Vacuum suddenly stops when using motorized pet hair or mini turbo brush attachment
Advertisements
Possible Causes
Mini turbo brush jammed with hair, Accessory brush bearings seized, Overload protection triggered in accessory, Blocked air path in attachment
How to Fix / Troubleshooting
Safety first: Remove the battery and detach the accessory brush.
- Open accessory: Many Bosch mini turbo brushes have a removable cover. Open it according to the manual.
- Clean brush: Remove hair and fibers from the small brush roll and end bearings.
- Check rotation: Spin the brush by hand. It should rotate freely. If not, replace the accessory brush.
- Clear air path: Ensure the small nozzle and internal channels are not blocked by lint or pet hair.
- Test without accessory: Run the vacuum without the mini brush. If it works fine, the issue is isolated to the accessory, which may need replacement.
Advertisements
Repair Difficulty
Very Easy
1/5
Required Part
Mini Turbo Brush Attachment
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements