Candy LED Circuit Failure

LED lights on the floor nozzle do not work, but brush spins normally

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Blown LED strip, Broken LED wiring, Faulty LED driver on nozzle PCB, Connector damage between wand and nozzle

Safety first: Remove the battery and detach the nozzle.

1. Check connector: Inspect the electrical connector between wand and nozzle for bent pins or damage.
2. Wiggle test: Reconnect the nozzle and gently move the connector while the vacuum is running (battery installed). If LEDs flicker, the connector or wiring is faulty.
3. Internal inspection: Open the nozzle housing and inspect the LED strip and wiring. Replace the LED strip or entire nozzle if components are burnt or broken.

Medium 3/5

LED Motorized Floor Nozzle

Check Price on Amazon

We may earn a commission from links on this page.