Vacuum motor runs but suction is very weak

Safety: Remove the battery before clearing blockages.

• Empty canister or tank: Remove and empty the dust container. Tap out compacted debris.
• Clean or replace filters: Remove the cartridge or HEPA filter and pre-filter. Clean according to DeWalt instructions or replace if heavily soiled or damaged.
• Check hose and wand: Detach and inspect for clogs. Push a flexible rod through to clear obstructions.
• Inspect seals: Check the canister lid gasket and any rubber seals for cracks or deformation. Replace if air leaks are visible or you hear hissing.
• Test without hose: Run the vacuum with the hose removed. If suction at the inlet is strong, the issue is in the hose or attachments.