Cordless vacuum shuts off within a few seconds of starting, LED flashes two times repeatedly

Safety first: Turn the unit OFF and remove the battery or disconnect from the charger. Avoid holding the trigger while inspecting the brush area.

• Step 1 – Check for jams: Flip the Dirt Devil over and inspect the motorized floor nozzle. Remove the brushroll cover (usually a few Phillips screws or release tabs). Clear hair, string, and debris from the brushroll and end caps.
• Step 2 – Spin test: With the brushroll removed, spin it by hand. It should rotate freely without grinding. If it binds or feels rough, the brushroll bearings may be seizing and overloading the motor.
• Step 3 – Inspect for melted plastic or odor: Look for signs of overheating around the motor housing in the nozzle. A burnt smell or melted plastic suggests a failing motor drawing excessive current.
• Step 4 – Reassemble and test: Reinstall the brushroll and cover. Fully charge the battery, then test the vacuum. If it still shuts off within seconds and flashes E2, disconnect power.
• Step 5 – Replace suspect parts: Replace the motorized floor nozzle assembly or the brushroll and motor module as a unit, depending on your Dirt Devil model. Use only compatible Dirt Devil parts.
• When to stop: If wiring appears damaged or you are not comfortable opening the nozzle, seek professional service.