Dreame Accessory Identification / Power Output Fault

F6 code, vacuum cannot detect or power the motorized accessories (mini power brush, soft roller, etc.).

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Damaged accessory ID pin in connector, Broken wiring in wand, Faulty accessory detection circuit on main PCB, Non-compatible accessory attached

Safety: Remove the battery.

Inspect wand connectors: Check both ends of the wand for bent or recessed pins. Clean gently with a dry cloth.
Bypass wand: Connect the motorized accessory directly to the main body (if design allows). If it works, the wand wiring is faulty.
Test different accessory: Try another motorized tool. If none are detected, the main body output circuit may be faulty.

Repair typically involves replacing the wand or main PCB. This is a technician-level repair.

Hard 4/5

Extension Wand Assembly

Check Price on Amazon

We may earn a commission from links on this page.