Electrolux Display / Indicator Failure

Vacuum runs but the display or battery LEDs do not work.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Faulty LED board, Loose display connector, Partial PCB failure, Impact damage to display

Safety first: Remove the battery before inspecting the housing.

Check for impact damage: Look for cracks or signs of a drop near the display area.
Basic reset: Remove the battery for a few minutes, then reinstall and test.
Functionality check: If suction and brushroll work normally, the vacuum can still be used, but you will not have visual battery or mode feedback.
Service if desired: Restoring display function requires replacement of the display/handle PCB by a technician.

Hard 4/5

Display / Handle PCB

Check Price on Amazon

We may earn a commission from links on this page.