Essentials
Charge Indicator / LED Display Fault
LED battery indicator on the vacuum does not light up during charging, but the unit still charges.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed LED segment on display board, Loose LED/display connector, Minor firmware glitch, Damaged display PCB
How to Fix / Troubleshooting
Safety first: Unplug the charger and remove the battery before inspecting the display area.
- Step 1 – Confirm actual charging: Time how long the vacuum runs after a full charge to ensure the battery is indeed charging.
- Step 2 – Power reset: Remove the battery for 10 minutes, then reinstall and check if the indicator behavior changes.
- Step 3 – Inspect for damage: Look for cracks or impact marks around the display window.
- Step 4 – Replace display module: If the vacuum functions normally but the indicator remains dead, the display/LED board may need replacement.
Warning: Do not rely solely on the faulty indicator to judge charge level; monitor runtime until repaired.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Essentials LED Display / Indicator Board
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements