ETA Imbalanced Brush Roll or Motor Fan

Cordless vacuum vibrates excessively in the hand during operation.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Brush roll clogged unevenly with hair, Bent brush roll, Damaged motor fan blades, Foreign object stuck in fan

How to Fix / Troubleshooting

Safety first: Turn OFF the vacuum, remove the battery, and detach the floor nozzle.

  • Clean brush roll thoroughly: Remove all hair and debris from the brush roll, especially at the ends. Ensure it is clean and spins evenly.
  • Inspect for warping: Roll the brush on a flat surface. If it wobbles or appears bent, replace it.
  • Test main body alone: Run the vacuum without the wand and nozzle. If vibration persists, the main motor fan may be damaged.

When to call a technician: Motor fan imbalance requires motor replacement, which should be performed by an ETA service center.

Advertisements

Repair Difficulty

Medium 3/5

Required Part

Brush Roll for ETA Motorized Nozzle
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements