Vacuum runs but attached power tool or accessory is not being adequately cleaned (poor extraction at tool)

Safety first: Remove the battery before changing accessories or adapters.

• 1. Verify hose and adapter: Use the Festool hose diameter and adapter recommended for the specific tool. Undersized or oversized hoses reduce performance.
• 2. Check tool port: Inspect the tool's dust extraction port for clogs or obstructions and clear them.
• 3. Improve sealing: Ensure the adapter fits snugly on the tool. Use Festool-specific adapters or sealing rings where available.
• 4. Increase suction setting: Adjust the vacuum's suction or speed control to a higher setting when using tools that generate large chips or dust volumes.